FANTEC WR-C3141-12G SAS/SATA (12G/6G) backplane for 4x 3.5"/2.5" HDD/SSD

Backplane systems are used in servers and enable the easy installation or replacement of hard disks. Due to the plug-in technology of hard drive racks, the hard drives are integrated into the system via plug-in connections and not via cable connections, as is usually the case. This means that the hard disks can be replaced without tools and very easily without having to open the server housing. The hot-swap technology also enables the hard disks to be replaced and exchanged during operation.SAS/SATA (12G/6G) backplane for 4x 3.5"/2.5" HDD/SSD in a 3x 5.25" slot. Data connection via SFF8643. With 80mm fan at the rear. Hard drive tray. Housing made of metal/artificial material. Front in black.Quick mounting and changing of hard disks by using hard disk carriers.Hard drive carrier suitable for 3.5" or 2.5" HDD or SSDSuitable for RAIDPlug & PlayHotswapLEDs for hard disk status displaySuitable for 3.5" and 2.5" SAS 12GSuitable for 3.5" and 2.5" SATA 6GFeatures4x LEDs hard disk access: green - switched on / blue flashing - data access1x 80x80 mm fanSAS I,II,III 12G + SATA I,II,III 6GEnclosure, slide-in units and front doors made of metal/plasticEnclosure, slide-in units, front doors blackForm factor: 3x 5.25" slide-in unitsConnectors: 4x SAS/SATA 22-pin connectors internal, 1x SFF8643 connector externalConnectors power: 2x Molex power supply externalIncluded accessories: ScrewsDimensions product (W x D x H): 146 x 211 x 126mmWeight product: 1.97 kgCouleur : noir